SRAS-100
Short Rudder Assembly
(single pickup tapered rudder)
Short Rudder Assembly (single pickup tapered rudder) is made
from 6061-T6 aircraft quality aluminum. This kit sets your rudder 1
and 1/4 inches from the transom to the leading edge of the rudder.  
The oversize water passage and fitting are used to cool the engine
and the exhaust system simultaneously.  Additional features include a
breakaway rudder system for safety.

Features:
-Extends out 1 and 1/4 inches from transom to the leading edge of
the rudder.
-Bottom front edge of rudder is shaped to eliminate lift
-Length (total = 6 and 5/16 inch) (from pickup = 5 and 3/8 inch).
-Width (top of rudder 1 and 3/8) (bottom of rudder is just under 1")